Pneumatic rejection systems are designed for universal application even for high capacity lines and guarantee a reliable and certain rejection of faulty containers, independent of material, shape and format of the containers to be rejected. The containers will be rejected off the production process by a pneumatic cylinder. According to the container type, different valves for the adaptation to the
containers are used. The systems are equipped with pneumatic pressure
regulators to ensure that the rejection is optimally adapted to the container
mass.
The STRATEC PUSHERS can be installed universally and simply on the conveyor.
The operation is controlled by an external control device.

The STRATEC BIN PUSH system was developed as an economic alternative to the conventional rejection systems.
The containers are pushed by a solid plate into a bin, while a damaging of the containers
might be possible. Due to the design of the rejection plate, no height adjustment to different
formats will be necessary.

Here you find the complete prospect with detailed information for reading, printing or forwarding
Prospect as PDF-File: STRATEC SOFTPUSH and STRATEC BIN PUSH	< here >

The STRATEC SOFT PUSH is recommended for application where bottles and cans should be rejected onto a separate rejection conveyor. Especially in combination with Quality Control Systems after the filler, labeller or on the conveyor.

The STRATEC BIN PUSH is recommended to reject cans, glass or PET containers off the production process and is also an appropriate system for highest capacity applications. The containers are pushed into a bin to be disposed subsequently.